- Remaining Timing :-
(1). Soft drinks and baby feeding bottles are generally made up of
- (a). polyester
- (b). polyurethane
- (c). polyethylene-HDPE
- (d). polyamide
- (e). None of these
Explanation:
(2). Which of the following is fully fluorinated polymer?
- (a). neoprene
- (b). Teflon
- (c). Thiokol
- (d). PVC
- (e). None of these
Explanation:
(3). Soft drinks bottles are generally made up of
- (a). polyester
- (b). polyurethane
- (c). polystyrene
- (d). polyamide
- (e). None of these
Explanation:
(4). Which of the following is used to make non-stick cookware?
- (a). PVC
- (b). polystyrene
- (c). polyethylene(terephthalate)
- (d). polytetrafluoroethylene
- (e). None of these
Explanation:
(5). Which of the following is a biodegradable polymer?
- (a). cellulose
- (b). polythene
- (c). polyvinyl chloride
- (d). nylon-6
- (e). None of these
Explanation:
(6). In buna-s, s stands for
- (a). sulphur
- (b). sodium
- (c). synthetic
- (d). styrene
- (e). None of these
Explanation:
(7). The catalyst used for the polymerization of olefins is
- (a). Ziegler-natta catalyst
- (b). wilkinson's catalyst
- (c). pd-catalyst
- (d). zeise's salt complex
- (e). None of these
Explanation:
(8). High density polythene is manufactured by heating ethylene in a hydrocarbon solvent at the conditions
- (a). 333-343 K temp., 6-7 atm pressure
- (b). 463-483 K temp., 1500 atm pressure
- (c). 150-200 K temp., 1-2 atm pressure
- (d). 763-863 K temp., 1200 atm pressure
- (e). None of these
Explanation:
(9). The biodegradable polymer among the following is
- (a). Nylon-6
- (b). Nylon-6-Nylon-6,6
- (c). Nylon-6,10
- (d). Decron
- (e). None of these
Explanation:
(10). Among the following polymers, the strongest molecular forces are present in
- (a). elastomers
- (b). fibres
- (c). thermoplastics
- (d). thermosetting polymers
- (e). None of these
Explanation:
(11). The proportion of hexamethylene diamine and adipic acid used in the preparation of nylon-6,6 is
- (a). 1 : 2
- (b). 1 : 1
- (c). 2 : 1
- (d). 2 : 3
- (e). None of these
Explanation:
(12). Caprolactam is used for the manufacture of
- (a). teflon
- (b). terylene
- (c). nylon 6,6
- (d). nylon 6
- (e). None of these
Explanation:
(13). Biodegradable polymer which can be produced from glycine and aminocaproic acid is
- (a). buna-N
- (b). nylon 6,6
- (c). nylon 2-nylon 6
- (d). PHBV
- (e). None of these
Explanation:
(14). Nylon is an example of
- (a). Polyamide
- (b). Polythene
- (c). Polyester
- (d). Polysaccharide
- (e). None of these
Explanation:
- (a). 1
- (b). 2
- (c). 3
- (d). 4
- (e). None of these
Explanation:
- (a). 1
- (b). 2
- (c). 3
- (d). 4
- (e). None of these
Explanation:
- (a). 1
- (b). 2
- (c). 3
- (d). 4
- (e). None of these
Explanation:
- (a). 1
- (b). 2
- (c). 3
- (d). 4
- (e). None of these
Explanation:
- (a). 1
- (b). 2
- (c). 3
- (d). 4
- (e). None of these
Explanation:
- (a). 1
- (b). 2
- (c). 3
- (d). 4
- (e). None of these
Explanation: